Replace Chain

Discussing the meaning of the code type chain wheel. The goal is that to understand the function and duty chain, which will be expected not one choose when they want to change the type of chain.

Moreover, changing the chain wheels are still closely related with the modification. Like the larger tire change plus the addition of large variations in weight, the load or power is transmitted growing chain. Ideally, the spec chain adjust, too.

Even some who want to pursue a lighter weight and friction, so that the specification had to be adjusted chain needs. As an example in motor racing. These mounts are usually mild wear gear that its dimensions clearly thinner and lighter than the standard size.

The chain wheel is known today, there are types 415, 420, 428, 428H and 520. As used in Honda Supra X 428 size which have tensile strength up to 1.8 tons. And if there is the letter 'H' on the back, according to the chain table can power up to 2.1 tonnes. But for the type under the code, it is definitely lighter and vice versa.

Chain code is also meaningless. Kinds of chain type 420, number 4 states that the distance between pins 4 / 8 x 25.4 mm = 12.7 mm. Then two points behind with 20, stating the width between the plates in the left-right chain. Converted wear chain table, the same as 6.25 mm.

Unfortunately, until today still many consumers are reluctant or not know about the specifications of the chain that is used in the motor. They can chain substitution him all aliases used to all the gear without any problems. Though many of the risks.

Ideally buy 1 set, which follows the chain gear. If only chains, most likely not get into the eye gear. But if greatness, there will be no stopping the noise during bergasing wheel.

Another thing, if there are consumers who want to dirty another brand of chain from the motor when I want to replace the chain. Yong said, an important part to note not only the type, but also the number of chains. Because the number of the chain is related to the length dimension of the gear motor swing arm setnya used.

If an extension can still be cut. Then, the connection is locked deh wear chain whose strength is not reduced. But, if short, jointed chain wear another piece certainly would be very risky. Soale, pin power connector is not as strong as the chain would be original.

And no less important when adopting a set of gear-motor chains, see the shape of the hole and the locking system front and rear gear. Because, for some types of duck and motor sport, there are some models lock ring clip or ring bolted.

Usually the model ring clip used on front gear motor output duck type Yamaha and Suzuki brands. Meanwhile, if the duck Honda added the anchoring ring bolted to the gear shift. Who's it for the rear gear, make sure the position of the hole into the bolt does not shear-4.